20 mm x 52 mm x 10 mm NBS ZARN 2052 TN Complex bearings

r1,2 min.:5 mm; d1:1054 mm; d:900 mm; Basic static load rating C0:27000 kN; Limiting speed:300 r/min; Mass bearing:210 kg; Minimum axial load factor A:58; Basic dynamic load rating C:4000 kN; H:130 mm; Da max.:928 mm;

Basic Static Radial Load Rating Co:108000 N; Grease Speed Rating Open/Shielded n1:3400 rpm; Fillet Radius ra:2.50 mm; B:73.03 mm; Basic Dynamic Radial Load Rating C:143000 N; D:190.0000 mm; Sealed Speed Rating n3:2400 rpm; d:90.000 mm; Oil Speed Rating Open/Shielded n2:4000 rpm; Accessories:Removabl

Coefficient of friction µ max.:0.1; Coefficient of friction µ min.:0.05; Tolerance housing:H7; Tolerance shaft:h8; B:45 mm; Specific dynamic load factor K:10 N/mm²; Permissible sliding velocity v max.:5 m/s; Permissible sliding velocity v min.:0.25 m/s; d:45 mm; D:51 mm;

d:19.05 mm; Recommended diameter for attachment bolts, mm G:10 mm; Recommended diameter for attachment bolts, inch G:0.375 in; H:111.9 mm; Fatigue load limit Pu:0.28 kN; J:89.7 mm; Db1:55.7 mm; Mass bearing unit:0.47 kg; End cover:ECW 204; Db2:60.3 mm;

Initial grease fill:1304.1 g; RG:3/4 NPT; A2:250.825 mm; P150°:75.6 kN; da:160.338 mm; Labyrinth ring:2 x LOR 146; P60°:234 kN; h:60.325 mm; R2:41.275 mm; End plug (suffix Y):EPR 19;

P120°:160 kN; J max.:708.025 mm; ba:90.487 mm; Cap bolt:4 x 1-8 UNC; R1:130.175 mm; Housing:SAF 544; H1:241.3 mm; P150°:145 kN; H2:95.25 mm; Pa:71.2 kN;

Mass rod end:0.53 kg; l2 max.:128 mm; d:25 mm; l1 min.:53 mm; Basic static load rating C0:78 kN; C1 max.:18 mm; r1 min.:0.6 mm; B:20 mm; d2 max.:65 mm; α:7 °;

Accessories:No Shield, no Seal; Basic Dynamic Radial Load Rating C:22900 N; Grease Speed Rating n1:8000 rpm; B:22.20 mm; d:25.000 mm; D:52.0000 mm; Oil Speed Rating n2:11000 rpm; Basic Static Radial Load Rating Co:21200 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:8000 rpm;

Basic Dynamic Radial Load Rating C:44200 N; B:23.00 mm; D:90.0000 mm; Fillet Radius ra:1.50 mm; Oil Speed Rating n2:9500 rpm; Basic Static Radial Load Rating Co:31000 N; Grease Speed Rating n1:7300 rpm; d:40.000 mm;

d:20.000 mm; Sealed Speed Rating n3:9500 rpm; Accessories:Removable Metal Shie; Grease Speed Rating Open/Shielded n1:13000 rpm; Basic Static Radial Load Rating Co:7800 N; Oil Speed Rating Open/Shielded n2:16000 rpm; B:22.23 mm; Basic Dynamic Radial Load Rating C:15900 N; Fillet Radius ra:1.00 mm; D:

d2:111.125 mm; A:68.263 mm; S:0.794 mm; H:165.894 mm; H2:57.15 mm; Limiting speed:3400 r/min; A1:95.25 mm; B:92.075 mm; L:265.113 mm; J min.:198.438 mm;

D:85.0000 mm; B:30.20 mm; Basic Static Radial Load Rating Co:54000 N; d:45.000 mm; Fillet Radius ra:1.00 mm; Oil Speed Rating n2:6700 rpm; Sealed Speed Rating n3:5000 rpm; Basic Dynamic Radial Load Rating C:51200 N; Grease Speed Rating n1:5000 rpm; Accessories:One Seal;

Accessories:One Seal; Basic Static Radial Load Rating Co:415000 N; Grease Speed Rating Open/Shielded n1:1100 rpm; D:460.0000 mm; d:340.000 mm; Basic Dynamic Radial Load Rating C:281000 N; Sealed Speed Rating n3:700 rpm; Fillet Radius ra:3.00 mm; B:56.00 mm; Oil Speed Rating Open/Shielded n2:1400 rpm

B:70 mm; Hydraulic nut:HMV 88E; d:440 mm; B5:90 mm; d1:410 mm; d3:560 mm; B1:307 mm; G2:M 8; Locking device:MS 3192-88; G:Tr 440x5;

Cap bolt, rec. tightening torque:600 N·m; N:50 mm; bc:208.5 mm; J1:220 mm; Eye bolt, size:2 x M 36; Appropriate attachment bolt, rec. tightening torque:2280 N·m; J6:920 mm; Da:600 mm; P0°:6000 kN; P55°:7700 kN;